Gude Expert Power Control 1202-1, 4 x Schuko with integrated current metering and monitoring for TCP/IP
Expert Power Control 1202 Series enables switching and metering of electrical appliances through TCP/IP network. The device disposes of four load outlets (max. 16 A). These Power Ports are individually switchable through web interface, serial interface, SNMP or a button directly on the device. Two energy meters are integrated and allow measuring of various electrical dimensions. A clearly visible LED display reveals total current, IP address, sensor data and error reports. The sensor interface allows monitoring of ambient temperature and humidity. The Series consists of three product variants with alternative connector types for Germany (1202-1 = default), Belgium/France (1202-2 = inform in "comments to order) and Switzerland (1202-3 = inform in "comments to order).
Benefits
- 4 switchable load outlets (Schuko types F, E, J)
- Metering of energy and electrical dimensions
- Watchdog functionality for load outlet
- Integrated overvoltage protection
- High inrush relays for start-up peaks
- Interface for optional sensors
- IPv6 ready, SSL and SNMPv3 integrated
Features
- 4 Power Ports individually switchable directly on the device, via HTTP and SNMP
- Case allows mounting in 19 inch racks
- Metering of energy, current, power factor, phase angle, frequency, voltage and active/apparent/reactive power
- Two energy meters, one meters continuously, the other energy meter is resettable
- Status and power-up delay individually adjustable for each Power Port after power blackout (0...9999 seconds)
- Latency time of 1 second prevents simultaneous power-up of multiple Power Ports
- Programmable turn-on/turn-off sequence enabling automatic switching of Power Ports to previous state after configurable time period
- 4-channel watchdog, an individual watchdog (ICMP/TCP) can be assigned for each Power Port
- A clearly visible LED display on the device reveal total current, IP address, sensor data and error reports
- Interface for optional sensors (see Accessories)
- Integrated overvoltage protection prevents damage of device and of connected consumers (L-N 10 kA), status retrievable over network
- Dedicated high-inrush relays avoid welding of relay contacts at start-up peaks
- Free Android App and iOS App allow access from anywhere
- Low internal power consumption, max. 5 watts
- Developed and manufactured in Germany
Network
- Dynamic IP address allocation by DHCP or manual allocation with static IP address
- Firmware update over Ethernet during operations (without reboot of device or load outlets)
- IPv6-ready
- HTTP/HTTPS, e-mail (SSL, STARTTLS)
- SNMPv1, v2c, v3 (Get/Traps)
- TLS 1.0, 1.1, 1.2
- Syslog support
- IP Access Control List
- Secure login through SSL
- Comfortable configuration by web browser, Windows or Linux tool
- 10/100 Mbit/s
Electrical Connections |
1 power supply (Schuko F, max. 16 A) for 1202-1 |
1 power supply (Schuko E, max. 16 A) for 1202-2 |
1 power supply (Schuko J, max. 10 A) for 1202-3 |
4 load outlets (Schuko F, max. 16 A) for 1202-1 |
4 load outlets (Schuko E, max. 16 A) for 1202-2 |
4 load outlets (Schuko J, max. 10 A) for 1202-3 automatic cut-out as per SEV1011:2009/A1:2012 |
1 Ethernet connector RJ45 (10/100 Mbit/s) |
1 Mini-DIN connector for optional sensors |
Technical Details |
LxHxD: 48.4 x 4.6 x 7.4 cm |
Weight: ca. 1 kg |
Maximum current (total): 16 A (1202-3: 10 A) |
Maximum current (per port): 16 A (1202-3: 10 A) |
Power consumption: ca. 5 W |
Operating temperature: 0-50 °C |
Storage temperature: -20 - 70 °C |
Relative humidity: 0 - 95 % (non-condensing environment) |
Order code |
1202-1 (Schuko for Germany, 16 A) |
1202-2 (Schuko for Belgium/France, 16 A) |
1202-3 (Schuko for Switzerland, 10 A) |