GUDE Expert Power Control 8221-1 12-fold switched PDU with integrated current metering
Expert Power Control 8221-1
12-fold switched PDU with integrated current metering and monitoring for TCP/IP networks
Expert Power Control 8221-1 enables switching and metering of electrical appliances through TCP/IP network or serial interface. The rear panel disposes of 12 load outlets (max. 10 A). These Power Ports are individually switchable through web interface, serial interface, SNMP or a button directly on the device. The Power Distribution Unit has SNMPv3, SSL, IPv6 and Telnet support integrated.
Six Power Ports each of Expert Power Control 8221-1 are pooled into a bank equipped with a separate 16 A fuse. Both banks dispose of two energy meters each. Various electrical dimensions are measured on the supply lines. Two seperate supply lines enable switching of 32 A resp. 7500 W (dual circuit). Sensor interfaces allow monitoring of ambient temperature and humidity.
Benefits
- 12 load outlets in 1 rack unit
- 2 independent banks of 6 load outlets
- Energy metering per bank
- Total switching power: 7500 W
- 2 interfaces for optional sensors
- SNMPv3, SSL and Telnet integrated
- IPv6 ready
Features
- 12 Power Ports individually switchable directly on the device, via HTTP, command line tool and RS232 serial interface
- 2 energy meters per bank, one meter continuously, the other resettable
- Metering of energy, current, power factor, phase angle, frequency, voltage and active / apparent / reactive power
- Latency time of 1 second prevents simultaneous power-up of multiple Power Ports
- Paired switching of outlets possible, e.g. output 1 of bank 1 simultaneously with output 1 of bank 2
- Status and power-up delay individually adjustable for each Power Port after power blackout (0...9999 seconds)
- Programmable turn-on/turn-off sequence (batch mode) enabling automatic switching of Power Ports to previous state after configurable time period
- Previous state of Power Ports can be automatically restored after reboot of device
- 12-channel watchdog, an individual watchdog (ICMP/TCP) can be assigned for each Power Port
- 2 independent power inputs of 230 V for the same or different phases
- A clearly visible LED display per bank for total current, IP address, sensor data and error reports
- Dedicated high-inrush relays avoid welding of relay contacts at start-up peaks
- 2 interfaces for optional sensors (see Accessories)
- Integrated overvoltage protection prevents damage of device and of connected consumers (L-N 10 kA)
- Free Android App and iOS App allow access from anywhere
- Low internal power consumption
- Developed and manufactured in Germany
Network
- Dynamic IP address allocation by DHCP or manual allocation with static IP address
- IPv6-ready
- Firmware update over Ethernet during operations (without reboot of device or load outlets)
- HTTP/HTTPS, e-mail (SSL, STARTTLS)
- SNMPv1, v2c, v3 (Get/Traps)
- TLS 1.0, 1.1, 1.2
- Syslog support
- IP Access Control List
- Secure login through SSL
- Configuration and control via Telnet possible
- Comfortable configuration by web browser, Windows or Linux tool
- 10/100 Mbit/s
| Electrical Connections |
| 2 power supplies (IEC C20, max. 16 A, 230 V) |
| 2 x 6 load outlets (IEC C13, max. 10 A) |
| 1 Ethernet connector RJ45 (10/100 Mbit/s) |
| 1 serial interface RS232 (Sub-D, 9-pin) |
| 2 sensor inputs (RJ45) for optional sensors |
| Technical Details |
| 19 inch, 1 height unit |
| LxHxD: 43.9 x 4.4 x 19.5 cm (without brackets) |
| Weight: ca. 2.9 kg |
| Operating temperature: 0-50 °C |
| Storage temperature: -20 - 70 °C |
| Relative humidity: 0 - 95 % (non-condensing environment) |
| Scope of delivery |
| Expert Power Control 8221-1 |
| 2 connector cables (Schuko - IEC C19) |
| CD-ROM "Drivers, Tools & Manuals" |
| Quick start guide |
