4K HDMI + USB 2.0 Extender-Set over IP, up to 120m 4K 30Hz or 1080p 120Hz, Zero-Latency, AV Access 4KIP100-KVM
4KIP100-KVM 4K KVM over IP Extender
Control Remote PCs with Ease.
AV Access’s best-selling 4K HDMI KVM extender featuring plug-n-play design and zero latency.
No matter in a data control center, university campus, government, residential house or other scenario, our 4KIP100-KVM KVM over IP extender allows you to control remote PCs with ease, ideal for any long-distance KVM extension.
 |
 |
 |
PLUG & PLAYWorks flawlessly with a universal Ethernet switch; no need to configure IGMP. Supports simple DIP setting, quite friendly to installers and end-users. |
4K UHDTransmits 4K@30hz HDMI and USB 2.0 signals over single Cat5e/6 cable up to 120m/390ft. Also supports 1080P@120Hz, ideal for extending movie or game sources. |
ZERO LATENCYThere is no delay at all on end-to-end signal extension! Install it in your control center and get everything under your control! |
● 4K UHD & Zero Latency: Transmits 4K@30hz HDMI and USB 2.0 signals over a single Cat5e/6/7 cable up to 120m/390ft, with zero latency. No software or driver is required, just plug and play.
● Multi-User Control: Up to 16 sets of transmitter (TX) and receiver (RX) can work together via a standard Gigabit Ethernet switch without VLAN settings. Each TX and RX is built with a DIP switch for easy pairing.
● 3-in-1 USB Hub: Control your remote PC easily with a keyboard, mouse, touch-screen panel, or other USB 2.0 peripheral (high speed up to 480Mbps).
● High Refresh Rate: Supports 1080P@120Hz and 7.1-channel audio for a wonderful gaming experience. Works with all operating systems, like Windows, Mac, and Linux.
● High Reliability: Certificated by CE, FCC. Built-in superior surge/ESD protection. Comes with mounting ears for easy installation.
● Important Notes: This product is a KVM over IP extender kit. It doesn’t support matrix switching when working with a Gigabit switch.
Plug and Play, Easy to InstallThis cost-effective 4K KVM over IP extender kit is plug and play. No software or driver is required, totally hassle-free installation. To route the signal from a transmitter (TX) to a receiver (RX), you just need to toggle each individual switches of the DIP switch on the RX to the same positions as these in the TX. |
 |
 |
KVM Extension with Zero Latency
A pair of IP transmitter and receiver can be directly connected, extending 4K@30hz HDMI and USB signals over a single Cat5e/6/6a/7 cable up to 120m/390ft with zero latency. It transmits high-quality picture without any video loss and time delay.
|
Remote Control with up to 3x USB PeripheralsInstall this 4K KVM extender in your house, school, office, or control center to transmit high-speed USB 2.0 signals up to 120m/390ft via a single Cat cable. You can remotely control a computer, PlayStation or Xbox with up to 3x USB 2.0 peripherals, like a keyboard, mouse, microphone, camera, speakerphone, game controller, touch-screen panel, etc. |
 |
 |
Wonderful Gaming Experience with 1080P@120hzFor e-sports games where every second counts, low refresh rate can cause picture lag, greatly affecting the player’s performance. The 4K KVM extender supports 1080P@120Hz video input, ensuring your game sources can be effectively extended. With this 4K IP KVM extender, you can have an unprecedentedly enjoyable gaming experience. |
Important Notes before Using:
1. This product is a transmitter (TX) and receiver (RX) kit. We don’t sell them separately.
2. The product only supports point-to-point configuration, which means one TX can only be paired with one RX via the DIP switch. To provide enough bandwidth for data transmission and stable performance, a Gigabit switch is required when using one or more sets in the same network.
3. KVM switching is not supported when you use multiple sets with a Gigabit switch in the same network.
In the Box
- 1x 4KIP100-KVM Transmitter and Receiver Kit
- 2x Power Supply (DC 12 V 1A) with Exchangeable Plugs
- 1x USB 2.0 Type-B to Type-A Cable (L=1.5m)
- 4x Mounting Brackets (with Mounting Screws)
- 1x User Manual
Specifications
| Technical | |
| Input/Output | 1 x HDMI IN (19-pin female HDMI Type-A), 1 x USB HOST (female USB Type-B), 1 x 4-Pin DIP Switch, 1 x DC 12V connector with locking, 1 x LAN (RJ45) |
| Input Signal Type | HDMI 1.4b |
| Input Resolution Supported | 640×4808, 800×6008,10, 1024×7688,10,
1280×7206,7,8,9,10, 1280×7688,10, 1280×8008,10, 1280×9608,10, 1280×10248,10, 1360×7688, 1366×7688, 1440×9008,10, 1600×9008, 1600×12008, 1680×10508,10, 1920×10801,2,3,4,5,6,7,8,9,10, 1920×12008, 3840x2160P2,3,5, 4096x2160P2,3,5
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 100 Hz, 10 = at 120 Hz |
| Input Audio Format Supported | PCM 2.0 / 2.1 / 5.1 / 7.1, Dolby Digital 5.1 ch, Dolby Digital Plus, Dolby TrueHD, DTS 5.1 ch, DTS-HD High Resolution Audio, DTS-HD Master Audio |
| Maximum Data Rate | 9 Gbps |
| Maximum Pixel Clock | 300 MHz |
| Output Signal Type | Compressed IP streams |
| Transmission Distance | Cat 5e or above: 120m/395ft
HDMI: 15m/49ft |
| General | |
| Operating Temperature | 0 to + 45°C (32 to + 113 °F) |
| Storage Temperature | -20 to +70°C (-4 to +158 °F), |
| Humidity | 10% to 90%, non-condensing |
| ESD Protection | Human Body Model:
±8kV (air-gap discharge)/ ±4kV (contact discharge) |
| Power Supply | DC 12V 1A |
| Power Consumption | <2.5 W |
| Unit Dimensions
(W x H x D) |
112mm × 17.8mm × 65.2mm / 4.41’’ × 0.70’’ × 2.57’’ |
| Unit Weight
(without accessories) |
0.18kg/0.40lb |
Receiver
| Technical | |
| Input/Output | 1 x LAN (RJ45), 1 x HDMI OUT (19-pin female HDMI Type-A), 3 x USB DEVICE (female USB Type-A), 1 x 4-Pin DIP Switch, 1 x DC 12V connector with locking |
| Input/Output Signal Type | Compressed IP streams |
| Output Resolution Supported | 640×4808, 800×6008,10, 1024×7688,10,
1280×7206,7,8,9,10, 1280×7688,10, 1280×8008,10, 1280×9608,10, 1280×10248,10, 1360×7688, 1366×7688, 1440×9008,10, 1600×9008, 1600×12008, 1680×10508,10, 1920×10801,2,3,4,5,6,7,8,9,10, 1920×12008, 3840x2160P2,3,5, 4096x2160P2,3,5
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 100 Hz, 10 = at 120 Hz |
| Output Audio Format Supported | PCM 2.0 / 2.1 / 5.1 / 7.1, Dolby Digital 5.1 ch, Dolby Digital Plus, Dolby TrueHD, DTS 5.1 ch, DTS-HD High Resolution Audio, DTS-HD Master Audio |
| Maximum Data Rate | 9 Gbps |
| Maximum Pixel Clock | 300 MHz |
| Transmission Distance | Cat 5e or above：120m / 395ft |
| USB Consumption | Recommended no more than 0.5A per USB port |
| General | |
| Operating Temperature | 0 to to 45°C (32 to + 113 °F) |
| Storage Temperature | -20 to +70°C (-4 to +158 °F) |
| Humidity | 10% to 90%, non-condensing |
| ESD Protection | Human Body Model:
±8kV (air-gap discharge)/ ±4kV (contact discharge) |
| Power Supply | DC 12V 1A |
| Power Consumption | < 4W (without USB Consumption) |
| Unit Dimensions
(W x H x D) |
112mm × 17.8mm × 65.2mm / 4.41’’ × 0.70’’ × 2.57’’ |
| Unit Weight
(without accessories) |
0.18kg / 0.40lb |
B2B Product - Designed for use in a commercial environment.