Zero-Latency DisplayPort KVM-Extender Set with 2x USB 2.0, RS232, Audio, PoC, up to 100m, AV Access 4KEX100-DP-KVM
4KEX100-DP-KVM is AV Access’s newest 4K DisplayPort extender with KVM. It offers the distribution of 4K@30Hz UHD video, analog stereo, power, RS232 and USB 2.0 up to 100m/330ft over a single CAT6 or above cable. It also supports 1080P@120hz, ideal for PC control. Additional features include bi-directional 3.5mm stereo pass-through, automatic EDID management, one-way PoC, etc..
This DisplayPort KVM extender is ideal for homes, offices, control centers, video surveillance centers, conference rooms, schools, etc..
4K UHD & Zero Latency:
Transmits 4K@30hz DisplayPort signal up to 100m/330ft over single CAT6/7 cable, along with stereo audio and USB 2.0 extension. Also supports 1080P@120hz, ideal for PC control.
USB 2.0 up to 480Mbps:
1x USB host port on the transmitter, 2x USB device port on the receiver; easily control remote PC/NVR with keyboard, mouse or other USB 2.0 peripherals.
Bi-Directional Stereo/RS232:
Supports bi-directional 3.5mm stereo pass-through and RS232 pass-through; also supports one-way PoC and automatic EDID management.
Highly Reliable:
Certificated by CE, FCC. Built-in surge/lightning protection. Superior ESD protection.
Comes with mounting ear for easy installation.
Main Features:
- One way PoC, transmitter supplies the power for receiver
- Via Cat 6a/7 cable, 4Kx2K@30Hz or 1080P@60Hz output up to 100m.
- Via Cat 5e/6 cable, 4Kx2K@30Hz output up to 90m, 1080P@60Hz up to 100m
- DP 1.2 supported, up to 4k@30Hz and HDCP 1.4 compliance
- Supports Bi-directional stereo audio, RS232 and EDID pass through over HDBaseT
- USB 2.0 pass through over HDBaseT, with USB-HOST built in transmitter and USB-DEVICE built in receiver.
- All connectors in one side for easy installation
Notes:
1. This product is a transmitter and receiver kit. We don’t sell them separately.
2. One transmitter can work with only one receiver.
3. When connect USB devices to the extender, please make sure the total power consumption of these devices is less than 5V/0.5A.
|
4K@30 Ultra HD Image
This newest HDBaseT KVM extender is designed with DisplayPort 1.2 interface. Supporting up to 4K@30Hz (4:4:4) resolution, it can extend ultra HD image up to 100m/330ft with zero signal loss or delay. It also supports 1080P@120hz, ideal for PC control.
|
Effortless KVM Extension
This DisplayPort KVM extender provides remote source PC control with keyboard and mouse, interactive display operation, data transmission and USB streaming over distances up to 330ft / 100m. High-speed USB 2.0 up to 480Mbps passes through over HDBaseT with zero delay.
|
|
|
High refresh rate with 1080P @ 120Hz
The DisplayPort KVM extender supports 1080P@120Hz video input, ensuring your sources can be effectively extended. Thus, you can have an unprecedentedly smooth and seamless gaming experience.
|
One-Way PoC
With 48V PoC integrated inside, this DisplayPort KVM extender only requires one power supply connected to the transmitter to power both units. Its 12V power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.
|
|
- Transmitter 4KEX100-DP-KVM x 1
- Receiver 4KEX100-DP-KVM x 1
- Power Adapter (DC 12V 2A) x 1
- Phoenix Male Connector (3.5mm 3 Pin) x 2
- USB 2.0 Type-B to Type-A Cable (L=1.5m) x 1
- Mounting Bracket (with Mounting Screws) x 4
- User Manual x 1
Specification
Technical |
Video Signal Type |
DP1.2 with HDCP1.4 |
Audio Format |
L/R channel PCM 2.0 |
Input/Output Resolution Support |
640×4808, 800×6008, 1024×7688, 1280×7208, 1280×7688, 1280×8008, 1280×9608, 1280×10248, 1360×7688, 1366×7688, 1440×9008, 1600×9008, 1600×12008, 1680×10508, 1920×12008, 1920×12008, 2560×14408, 2560×16008, 3840x2160P5, 1920×10809
Note: 5 = at 30 Hz, 8 = at 60 Hz, 9 = 120Hz
|
General |
Operating Temperature |
0°C to 45°C (32°F to 113°F) |
Storage Temperature |
-20°C to 70°C (-4°F to 158°F) |
Humidity |
10% to 90%, non-condensing |
ESD Protection |
±8kV (Air-gap discharge)/
±4kV (Contact discharge)
|
Surge Protection |
Voltage: ±1 kV |
Power Consumption
(Maximum)
|
≤14.2W (Pair) |
DP Cable length |
3m (max.) |
Device Dimensions
(W x H x D)
|
200 mm × 25 mm × 100 mm
7.91” x 0.99” x 3.95”
|
Product Weight |
Transmitter: 0.5kg / 1.10lb
Receiver: 0.5kg / 1.10lb
|
B2B Product - Designed for use in a commercial environment.